Product: QSC E15

Omschrijving:
The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Model E15
Configuration 1 x 15-inch, 2-way, non-powered
Frequency Range (-6 dB) 55Hz - 20kHz
Power capacity: 500W continuous / 2000W peak
Sensitivity 97dB, 1W@1m
Coverage Angle 75° conical DMT
Output (peak SPL @ 1 m) 130dB
LF 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
HF 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver
Nominal Impedance 8 ohm
Cross-over Full-range only 1.55kHz
Input connectors 2x NL4, 1 x barrier strip
Enclosure Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
Mounting and suspension 6 x M8 suspension points, dual angle, 35mm pole-socket
Net weight 31 kg


€749,00 inclusief BTW
€619,00 exclusief BTW